ViBest
VIBEST SUPER PRO FLASHING TAPE 150mm
- Volume 0.0021 l
- Weight 1.50 kg
- Barcode 5902565071691
ViBest Superpro Flashing Tape
Medical Grade Acrylic Adhesive
Available in rolls of 75 mm x 25 metres & 150 mm x 25 metres
Withstands 90 days UV exposure with wall underlays
Withstands 180 days UV exposure with rigid wall underlays
Intended to be used with all Ventia and Verso Underlays/Vapour Barriers
It can also be used to join a wide range of flexible underlays and rigid sheathing products. The thick layer of acrylic adhesive bonds to common construction substrates.
Can be installed in up to -18° C
Installation Guide - Ventia Iron Roof Wall Underlay Installation Guide.pdf
The Wall Underlay is cut on a 45° angle away from each corner of the opening so the flaps can be folded into the opening and secured to the interior face of the timber framing.
Staple the Corner Moulds to the sill and jamb corners.
Before ViBest Super Pro is applied, ensure the surfaces are clean, dry and free from any surface contaminants such as dust and/or grease that may cause loss of adhesion. A length of ViBest Super Pro must be cut to the length of the sill plus 400 mm, then applied along the entire length of the sill and 200 mm up each jamb. The overhanging tape is cut at the corner of the opening to allow the tape to be folded onto the face of the Wall Underlay. A 400 mm length of ViBest Super Pro must be installed 200 mm down the jamb and 200 mm along the lintel at each of the top corners of the window and/or door joinery opening. A 75 mm wide x 150 mm long sealing tape "butterfly" must be installed at 45° across the lintel and jamb corner overlapping the corner by 3 mm to create a seal at the corner junction.
Cut another length of ViBest Super Pro to the exact length of the sill and overlay onto the already installed tape to ensure nail seal ability requirements are met.